Roco 10805 - Z21 light BOOSTER
■ Power 3 A (track output)
■ RailCom cutout (allows use of RailCom-track occupied detector)
■ Terminal loop feature with short-circuit detector
■ Connection via B bus (ideal also for multiZENTRALEpro), replaces Booster 10765
Please note: The power adapter is not included.
RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.
Roco 10806 - Z21 single BOOSTER
■ Power 3 A (track output)
■ Adjustable track voltage via Z21 (12–24 V)
■ RailCom global detector (allows POM reading in the booster section)
■ Configurable terminal loop feature with short-circuit detector
■ Brake generator feature, configurable
■ Connections via CAN bus, B bus, CDE bus
■ Configuration and update simply by app or PC via CAN
■ Matching power supply: 10851
Please note: The power adapter is not included.
RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.
Roco 10836 - Z21 switch DECODER
The Z21 switch DECODER is an universally applicable DCC switching decoder with a ower output of 2 Amperes for up to 8 switches or up to 16 elements such as LEDs and bulbs.
Simple connection
A separate DC supply can be connected so that the control centre or booster outputs are not placed under unnecessary load. If the wiring should be as simple as possible, the rail signal can also be used as a supply. In addition, the outputs are protected against overload and short-circuits.
Adjustable outputs
Each of the 8 output pairs can be set to different modes independently of the other. These are already pre-configured and can simply be selected. Each output pair can also be individually dimmed so that lighting can be adapted precisely to requirements.
It perfectly can be combined with
■ twin coil motors
■ simple light signals
■ all kind of illumination
■ the control of relays
Highlights:
■ 8 output pairs can be set independently
■ Optional power supply via extra applied switching power supply
■ Programmable with RailCom® on the main track (POM)
■ Short-circuit protection against overload
■ Update able
Adjustable modes
■ Standard operation - with configurable cut-in time for twin coil motors
■ Instantaneous operation - for switches and uncouplers. Can be be activated with a manual controller depending on the operating time (see also 10775)
■ Bi stable continuous operation - Switching on or switching over of the lighting and signals
■ Bi stable continuous operation - Switching on or switching over with light bulb simulation
■ Alternative flash
■ Alternative flash with light bulb simulation
■ Item numbers of switches 1-2040
RailCom is a registered trademark of the company Lenz Elektronik GmbH, Gießen.
Roco 10837 - Z21 switch DECODER
The Z21 signal DECODER is a universally applicable DCC decoder for complex light signals.
■ Updatable
■ Extensively configurable
■ RailCom® compatible
RailCom is a registered trademark of the company Lenz Elektronik GmbH.
Novelty 2020 - CW49
Roco 10869 - Z21 XL Booster
The Z21 XL series has been especially adapted for the requirements of large gauges (0, 1, 2, G), and unites the advantages and the convenience of the Z21 system with high output voltages.
The advantages of the Z21 XL BOOSTER
■ Output voltage 6 A at 20 V
■ Track format DCC and Motorola
■ B-BUS
■ CAN-BUS
■ CDE interface
■ RailCom receiver and transmission to control centre (CAN)
■ Forwarding of short-circuits to control centre (adjustable)
■ Firmware update (CAN)
■ RailCom cut-out, adjustable
Motorola is a registered trade name of Motorola Inc., Schaumburg, Illinois.
RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.
Roco 10870 - Z21 XL Series
The new Z21 XL series has been especially adapted for the requirements of large gauges (0, 1, 2, G), and unites the advantages and the convenience of the Z21 system with high output voltages.
In terms of the control centre scope of functions, the Z21 XL Series primarily differs from the Z21 through the track output with 6 Amperes of main track current. However, the rail voltage cannot be adjusted, and is dependent on the power supply unit used. In addition, the Z21 XL Series features a Z-CAN for a high number of Z21 XL boosters.
The benefits at a glance
■ More output voltage with 6 A at 20 V
■ Control via WLAN provides high range and transmission security
■ Convenient Z21 App and WLANMAUS for the control of your entire system
Included:
■ Z21 XL Series digital control centre
■ Power supply unit and cable 6 A 20 V
■ WLAN router & power supply unit